Extra Radio Cable p/n SLCABHTI

This radio cable is compatible with virtually all Icom HTs that use a stereo 3.5mm plug and a stereo 2.5mm plug.  This includes but is not limited to the radios listed below.

The matching Plug & Play Jumper Module for this cable is p/n SLMODHT.  Please note that this module has a built-in resistor and capacitor that are required by the HT.  You must use this jumper module with Icom HTs, or you will need to figure out how to install your own resistor and capacitor inside the SignaLink (not easy!).

NOTE:  This cable is compatible with Icom HTs only.  It will NOT work with other brands (Kenwood, Yaesu, etc.) because the pin spacing is different.

Compatible Radios:

IC-V86, ID-51A