Extra Radio Cable p/n SLCABHTW

This radio cable is compatible with virtually all Baofeng, Kenwood, and Wouxun HTs that use a standard Kenwood "K1" type Mic/Speaker plug (stereo 3.5mm plug and a stereo 2.5mm plug).  This includes but is not limited to the radios listed below.

The recommended Plug & Play Jumper Module for this cable is p/n SLMOD6PM (using the factory default 1200 baud setting).

NOTE:  This cable is NOT compatible with Icom or Yaesu HTs because the pin spacing is different.

Compatible Radios:

Baofeng

GT-3, UV-5R, UV-5RA/B/C/D/E/E+, UV-82, UV-8, BF-888S, BF-777S, BF-666S

Kenwood

TH-D7, TH-D7A/AG/E, TH-F6, TH-F6A, TH-F7, TH-F7E, TH-G71, TH-G71A/E, TH-K2, TH-K2A/AT/E/ET
TH-21, TH-21AT/BT, TH-22, TH-22A/AT, TH-22E

TK-240, TK-250, TK-255, TK-260, TK-260G, TK-270, TK-270G, TK-272G, TK-278, TK-278G, TK-340, TK-349
TK-350, TK-353, TK-360, TK-360G, TK-370, TK-370G, TK-373G, TK-378, TK-378G, TK-430, TK-431, TK-715
TK-2100, TK-2102, TK-2107, TK-2118, TK-2160, TK-3100, TK-3101, TK-3102, TK-3107, TK-3118, TK-3160

Wouxun

KG-UVD1P, KG-UV6D, KG-659, KG-669, KG-669+, KG-679, KG-679+, KG-816, KG-819, KG-689, KG-689+, KG-699