SignaLink Plug & Play Jumper Modules
The Plug & Play Jumper Module is an optional accessory that lets you easily configure the SignaLink for the radio connection that you are using. Instead of installing individual jumper wires to configure the SignaLink, you simply plug-in the preconfigured jumper module*. This greatly simplifies installation and eliminates the possibility of installing the jumper wires incorrectly. Moving the SignaLink to a different radio is also much easier, as you simply swap modules as needed to match the new radio cable.
Please note that the jumper module MUST be correct for the radio connection that you are using or you could damage your equipment. Please see our SignaLinkTM USB Product Guide to find the correct part number for your radio.
*Some jumper modules have a simple push-on jumper or two that may need to be set depending on your radio model. Jumper module installation instructions can be found here.
Images shown are for illustration purposes only. The actual jumper module may look different.
![]() |
![]() |
Plug & Play Jumper Module p/n SLMOD578 | Plug & Play Jumper Module p/n SLMOD5X3 |
NEW! For the AnyTone AT-D578UV | NEW! For the BTECH UV50x3 |
![]() |
![]() |
Plug & Play Jumper Module p/n SLMOD6PM | Plug & Play Jumper Module p/n SLMODVAR |
For most 6-pin mini-DIN Data Port type connections | NEW! |
![]() |
![]() |
Plug & Play Jumper Module p/n SLMOD13I | Plug & Play Jumper Module p/n SLMOD13K |
For Icom 13-pin Accy Port connection only | For Kenwood 13-pin Accy Port connection only |
![]() |
![]() |
Plug & Play Jumper Module p/n SLMOD8PD | Plug & Play Jumper Module p/n SLMOD5PD |
For Icom 8-pin DIN Accy Port connection only | Plug & Play Jumper Module p/n SLMOD5PD |
![]() |
![]() |
Plug & Play Jumper Module p/n SLMOD8RI | Plug & Play Jumper Module p/n SLMOD8RK |
For most Icom 8-pin round type Mic jack connections | For most Kenwood 8-pin round type Mic jack connections |
![]() |
![]() |
Plug & Play Jumper Module p/n SLMOD8RY | Plug & Play Jumper Module p/n SLMODR4I |
For most Yaesu 8-pin round type Mic jack connections | For most Icom and Alinco 8-pin Modular RJ-45 Mic jack connections |
![]() |
![]() |
Plug & Play Jumper Module p/n SLMODR4K | Plug & Play Jumper Module p/n SLMODR4Y |
For most Kenwood 8-pin Modular RJ-45 Mic jack connections | For most Yaesu 8-pin Modular RJ-45 Mic jack connections |
![]() |
![]() |
Plug & Play Jumper Module p/n SLMODR1Y | Plug & Play Jumper Module p/n SLMODKX3 |
For most Yaesu 6-pin Modular RJ-11/RJ-12 Mic jack connections | For the Elecraft KX2 and KX3 QRP radios |
![]() |
![]() |
Plug & Play Jumper Module p/n SLMODK3 | Plug & Play Jumper Module p/n SLMODHT |
For the Elecraft K3 rear panel Audio In/Out and PTT connection only | For use with our SLCABHTY, SLCABVXY, |
![]() |
![]() |
Plug & Play Jumper Module p/n SLMOD4RI | Plug & Play Jumper Module p/n SLMOD4RK |
For most Icom 4-pin round type Mic jack connections | For most Kenwood 4-pin round type Mic jack connections |
![]() |
![]() |
Plug & Play Jumper Module p/n SLMOD4RT | Plug & Play Jumper Module p/n SLMOD4RY |
For most Ten-Tec 4-pin round type Mic jack connections | For most Yaesu 4-pin round type Mic jack connections |