SignaLink USB p/n SLUSB135

>>> Please see our SignaLink^TM USB Product Guide to find the correct part number for your radio. <<<

The SignaLink USB p/n SLUSB135 is compatible with the 9-pin DSUB9 jack on the Alinco DR-135, DR-235 and DR-435 series radios**, as well as the Yaesu FT-2600M.  It may also work with other radios that use this type of connector (contact us with the pin-out for your radio and we will confirm).

The recommended Plug & Play Jumper Module for this unit is p/n SLMOD6PM (see Related Items below to add this to your order).  Note that this is for 1200 baud audio operation only (this is the normal audio used by virtually all modes except VARA Wide).  If you want to use the radio's 9600 baud audio lines for VARA Wide, then please contact us for the special jumper wire settings.

NOTE:  The radio cable p/n SLCAB135 is INCLUDED with the SignaLink USB p/n SLUSB135 and it is now available in two lengths; 3ft (+/- 2 inches) or 6ft (+/- 2 inches).

**The optional Alinco packet TNC p/n EJ-41U CANNOT be installed inside the radio or this cable will not work.