SignaLink USB p/n SLUSB847

>>> Please see our SignaLink^TM USB Product Guide to find the correct part number for your radio. <<<

The SignaLink USB p/n SLUSB847 is compatible with the Yaesu FT-847's rear panel "Data I/O" jack for HF operation only.  It is also compatible with some radios that use a single 3.5mm stereo plug for Mic/PTT, Audio Out, and Ground, such as the Xiegu X1M series of QRP radios.

NOTE:  The radio cable p/n SLCAB847 is INCLUDED with the SignaLink USB p/n SLUSB847.

The recommended Plug & Play Jumper Module for the Yaesu FT-847 is p/n SLMODHT.  Please note that this module has a built-in resistor and capacitor that are required by the radio.  You must use this jumper module with this radio, or you will need to figure out how to install your own resistor and capacitor inside the SignaLink (not easy!).

Compatible Radios:

Yaesu FT-847 (REQUIRES Jumper Module p/n SLMODHT - see "Related Products" below)

Xiegu X1M / X1M PRO  (contact us for the jumper settings - these radios DO NOT use Jumper Module p/n SLMODHT)

LNR Precision LD-11  (contact us for the jumper settings - this radio DO NOT use Jumper Module p/n SLMODHT)