SignaLink USB p/n SLUSBSWL

The SignaLink USB p/n SLUSBSWL is for the Short Wave Listener (SWL) or Scanner Enthusiast that wants an easy way to connect their radio receiver or scanner to their computer for Receive Only operation of various digital communication modes.  This interface provides full isolation so there are no ground loops, and it comes supplied with an audio cable and adapters to fit the most common audio output jacks found on receivers and scanners.  This includes:

• 3.5mm (1/8") Speaker or Headphone Output (stereo or mono)
• 6.3mm (1/4") Speaker or Headphone Output (stereo or mono)
• RCA Audio Output (sometimes called Line Out, Recording Out or Monitor Out)
• An unterminated radio cable is also supplied so you can attach your own connector if a different type is needed.

The SignaLink USB p/n SLUSBSWL does not require configuration of the internal jumper socket if using a standard 3.5mm (1/8"), 6.3mm (1/4") or RCA audio output connection, so installation is very simple.  Note that this unit can be attached to a transceiver for full transmit/receive operation at any time by simply changing radio cables and modules to match your radio.